Saab 9-X BioHybrid

Saab unveiled today the 9-X BioHybrid Concept, a preview version of the 2010 9-1, a model that will come to compete with models like BMW 1-Series. The 9-X BioHybrid evolves visual design themes from the award-winning Aero X coupe (shown Geneva 2006) and multi-dimensional 9X (shown Frankfurt 2001) concepts.


The 9-X BioHybrid Concept is powered by a 1.4-liter BioPower turbo engine, optimized for bioethanol (E85) fuel that delivers 200 hp. The 9-X BioHybrid explores the potential for using active aerodynamics to reduce drag – and fuel consumption – at cruising speeds. Above 70 kph (43 mph), the upper and lower bodywork is reshaped as the roof spoiler automatically extends to further lengthen the roof line and an underbody diffuser is deployed from the bottom of the rear bumper.


At the front, the deep grille, that concave styling line in the hood pressing and the ‘wraparound’ windshield are inspired by the award-winning Aero X concept shown at Geneva two years ago. The 9-X BioHybrid cuts a unique silhouette in compact car design. The longer roof line and ‘sawn off’ rear styling contributes to a better aerodynamic performance and provides more interior room than a conventional compact hatchback with a sloping screen and rear trunk lid deck.

Press release

The Saab 9-X BioHybrid concept demonstrates how Saab design values could be expressed in a future compact car format. It is focused on youthful customers, typical of the premium compact car segment. They seek and value progressive product design and efficient performance, with easy access to high-tech communications, as well as a sporty driving experience.

The bold execution of the 9-X BioHybrid evolves visual design themes from the award-winning Aero X coupe (shown Geneva 2006) and multi-dimensional 9X (shown Frankfurt 2001) concepts. Inside, it showcases an entirely new expression of Saab’s driver-focused cockpit design, as well as innovative seamless in-car connectivity for all personal nomadic devices. Smart rear functionality features a cargo deck with an automatic sliding floor and a ‘friction’ loading system.

The small yet powerful 200 hp (147 kW), 1.4-liter BioPower turbo engine, optimized for bioethanol (E85) fuel, is backed by GM’s next-generation hybrid system (see separate release for details) for efficient, environmentally-responsible performance.

“This concept redefines conventional compact car design.” says Jan Åke Jonsson, Saab’s Managing Director. “It shows how progressive Saab design can be combined with smart features and responsible, rightsizing performance that is in tune with the expectations of younger buyers in this segment.”


Clean Scandinavian Design
With minimal bodywork overhangs, a wide stance and extended roof line, the three-door Saab 9-X BioHybrid brings a dynamic, new dimension to conventional ‘hatchback’ looks. The single window graphic, smooth ‘fuselage’ bodywork – without any visible handles or even door mirrors – and ‘ice block’ lighting themes draw on roots in Scandinavian design and Saab’s aircraft heritage.

At the front, the deep grille, that concave styling line in the hood pressing and the ‘wraparound’ windshield are inspired by the award-winning Aero X concept shown at Geneva two years ago. The car’s overall proportions and rear functionality are developed from the 9X multi-role concept shown at Frankfurt in 2001.

The 9-X BioHybrid cuts a unique silhouette in compact car design. The longer roof line and ‘sawn off’ rear styling contributes to a better aerodynamic performance and provides more interior room than a conventional compact hatchback with a sloping screen and rear trunk lid deck.

Touch-sensitive, keyless entry, eliminates the need for exterior door handles. And the use of small, retracting rear-view camera pods - instead of larger door mirrors - further contributes to the clean ‘fuselage’ effect, while also reducing aerodynamic drag at speed.

A large solar cell in the glass roof takes advantage of free energy from the sun by adding charge to the hybrid battery pack while the vehicle is parked and also when it is being driven.

At night, driving comfort is improved by automatic switching between high and dipped headlamps beams. A front -mounted camera monitors light sources on the road ahead and small shutters automatically ‘hood’ the high beam when on-coming traffic is approaching.


Active Aerodynamics
Echoing Saab’s roots in aircraft design, the 9-X BioHybrid explores the potential for using active aerodynamics to reduce drag – and fuel consumption – at cruising speeds. Above 70 kph (43 mph), the upper and lower bodywork is reshaped as the roof spoiler automatically extends to further lengthen the roof line and an underbody diffuser is deployed from the bottom of the rear bumper.
During heavy braking from over 100 kph (62 mph), the rear spoiler is raised, adding downforce over the rear axle. This action also reveals a reflector that increases the visibility of the brake light underneath, as a further warning of heavy braking.


Mould-breaking Interior
Innovative design is even more dramatic inside the four-seater cabin, upholstered in white leather at the front and black. Here, the 9-X BioHybrid introduces an entirely new execution of Saab’s driver-focused cockpit design. The central, floor-mounted console, with its angled controls and displays, is now eliminated. Instead, the driver- focused layout incorporates a main instrument panel that sweeps out from the top of the door moulding, arching across the driver. Only shared climate control and interior lighting functions remain in a small, central touch-sensitive panel.

The driver information zone is a flat, arc-shaped multi-layered acrylic surface, within which a row of five displays screens is embedded and illuminated in green 3-D graphics. This includes an ‘infotainment’ screen and control panel in the driver’s door moulding. Another ‘infotainment’ screen showing, for example, navigation with more in-depth information if selected, is located across the cabin for the front passenger. All displays and menus can be operated, adapted or minimized by the driver via controls on the fixed hub and rim of the steering wheel. The rear view camera screens are conveniently located above the main displays within the driver’s eye line.

White ambient lighting of the cabin is taken a step further by a selectable level of suffused illumination, varying in intensity from a bright, cold to warm and soft. This is a feature that could even be programmed, for example, to reflect the changing seasons


Seamless Communication
The potential for seamless wireless connectivity (Bluetooth or WiFi) with one or multiple nomadic devices (mobile phones, PDAs etc) is demonstrated by Saab’s co-operation with Sony Ericsson in developing an interface for streaming data, entertainment and satellite navigation functions for in-car display and use. The interface allows the simultaneous use of devices, such as a phone and MP3 player, when passengers are in the car.

The functions of the nomadic device are controlled by a screen in the car, for example, while it is kept in the user’s pocket. The smarter the device, the more functions in the car. Depending on the type of device, it can upload its own displays, as well as lock /unlock the car and even remotely change in-car pre-sets. It is all part of the concept’s vision in appealing to younger buyers who expect easy, on-the-move access to multi-media.


Smart Load-carrying
At the rear, the cargo deck features an electrically-powered slide-out floor, which is activated when the bottom half of the tailgate drops down over the rear bumper. The top section, hinged from the roof, can be opened separately so that smaller items may be dropped inside easily.

The entire floor area, and the back of the folding rear seats, is covered by ‘high friction’ rubber carpeting. When the tailgate opens, aluminum bars in the floor are automatically raised just above the level of the high friction surface, making it easy to slide items inside. When the tailgate is closed, the bars are lowered to allow the high friction surface to ‘grip’ items and hold them securely in place.

The ‘default’ setting for the rear seats is the folded down position, reflecting the fact that the youthful target buyers for such a car will use its load-carrying capability more often than they need to accommodate rear passengers.


Vision
The 9-X BioHybrid has been created by a team under Anthony Lo, Director of Advanced Design at General Motors Europe, working in co-operation with the Saab Brand Center in Sweden. .

“This car is about efficiency in design and performance,” he says. “We have taken exterior themes from our previous concept work, such as the clean surfaces and lighting treatments, and tuned them for a compact format.

“Inside the car, the new driver-focused design theme and the easy, seamless connectivity are both features we will be developing in future.”

2008 Pininfarina Sintesi

The Sintesi is a sports car with four doors and four seats, developed by a highly innovative approach: it does not consider the car as a shape that covers the mechanicals, but one that gives a shape to the mechanicals around the passengers, starting from the latter. This approach, which is known as “Liquid” Packaging, has overturned traditional volumetric balances, improving weight distribution and lowering the centre of gravity, which are important elements for driving dynamics.

This was made possible by close collaboration with Nuvera, which developed the Quadrivium Fuel Cells system, the various components of which were distributed around the car, with four fuel cells positioned near to the wheels. The result is that the space for passengers is much more generous – in proportion to the total volume of the car – without detracting from the sporty line with its relaxed, elegant profile which is sleek, tapered and aerodynamic (Cd = 0.27). The modular nature of the fuel cells, combined with the batteries and a sophisticated overall electronic architecture (developed with PI Shurlok), allows for modular use of the available power depending on driving conditions.

Three years after the Birdcage 75th, Pininfarina returns with the Sintesi, a new concept car that explores ideas and solutions for the car of the future.

“The Sintesi is not only a testament to the creativeness of our design team,” declared Andrea Pininfarina, Chairman and CEO of the Group, “but it reiterates our historical ability to anticipate stylistic and technological solutions that we will see in the cars of the future.”

The Sintesi is a sports car with four doors and four seats, developed by a highly innovative approach: it does not consider the car as a shape that covers the mechanicals, but one that gives a shape to the mechanicals around the passengers, starting from the latter. This approach, which is known as “Liquid” Packaging, has overturned traditional volumetric balances, improving weight distribution and lowering the centre of gravity, which are important elements for driving dynamics.
This was made possible by close collaboration with Nuvera, which developed the Quadrivium Fuel Cells system, the various components of which were distributed around the car, with four fuel cells positioned near to the wheels. The result is that the space for passengers is much more generous – in proportion to the total volume of the car – without detracting from the sporty line with its relaxed, elegant profile which is sleek, tapered and aerodynamic (Cd = 0.27). The modular nature of the fuel cells, combined with the batteries and a sophisticated overall electronic architecture (developed with PI Shurlok), allows for modular use of the available power depending on driving conditions.

“Our source of inspiration,” said Lowie Vermeersch, Pininfarina Design Director, “was man’s freedom over technology, a car in which technology gives creative freedom back to the designer and allows us to explore new forms and future scenarios. But at the same time, we did not want everything to be limited to a flight of fancy, we wanted our approach to be very concrete. Which is why we combined and tested our ideas with the innovative technologies provided by our partners in this project.”

The Sintesi was imagined in a setting of Transparent Mobility which, thanks to Clancast®, the radio technology developed by Reicom after years of research, envisages that all cars act as nerve cells, creating a dynamic communications network managed by a disseminated intelligence. A real “living connective tissue” on which data and information about traffic and security, audio and video, Internet and cross-media content can travel. A concept of wireless connectivity that establishes a continuous, transparent dialogue between the town, the road and the vehicles that we will drive in the future, without limiting the motorist’s autonomy, but increasing his sense of freedom.

This futuristic scenario, based on concrete, existing technology, opens the door to advanced active safety solutions which in turn have made it possible to design the car with volumes that are not conditioned by today’s bulky passive safety systems.

The important role played by electronics in the Sintesi project is also evident in the design of the interior and the lights. Inside, the facia symbolises the flow of information in which the car moves. Created as a single semi-transparent piece by Materialise, using the additive technology of personalised manufacturing, its shape disseminates the information around the passenger compartment thanks to the intuitive use of colour and light.

The lights become focal points through which the car dialogues with its environment. In addition to the innovative LED system supplied by Osram, which made it possible to create a simple, strong shape that underlines the car’s central axis, the ‘headlights’ also incorporate the telecameras and the proximity radar system.

In Geneva other cars will make their debut on our clients’ stands.

The Ford stand hosts the debut of the new Ford Focus Coupé-Cabriolet, which is manufactured in the Pininfarina plant in Bairo, where the “job one” was celebrated on February 21. Like the other models of the Focus family, the new Coupé-Cabriolet, which will be launched this Spring, has a more gutsy, sporty look both inside and outside.

The Granturismo S has its world première on the Maserati stand, a sporty, high performance version of the Granturismo designed by Pininfarina, which won the “Best in Show” award at the 2007 Geneva Motor Show.

The Model Year 2008 of the Alfa Spider debuts on the Alfa Romeo stand. The model was developed jointly by Pininfarina and the Alfa Romeo Style Centre, and it includes significant improvements in the interior, guaranteeing an even higher level of comfort and well-being on board. The 2008 version of the Alfa Brera also makes its appearance; like the Spider, it is built in the Pininfarina plant in San Giorgio Canavese.

“This edition of the Geneva Motor Show – said Andrea Pininfarina - also represents a moment of joy and pride for the induction of my father, Sergio Pininfarina - our Honorary Chairman - into the European Automotive Hall of Fame, marking high points in the history of our company.”

2008 Seat Ibiza Concept

Seat will unveil at the Geneva Motor Show a concept version of the next generation Ibiza at the Geneva Motor Show. The Concept will be called Bocangera

The production version, the Ibiza Cupra will be powered by a VW Group’s 1.4 TSI engine delivering something between 170 and 200 Hp. The production Ibiza will be unveiled at the Madrid International Motor Show in May.

Land Rover LRX Concept

After being first unveiled at the Detroit Motor Show, the LRX comes in a hybrid version at the Geneva Motor Show. The LRX Concept for the Geneva Show is offered in black and silver version of LRX designed to highlight the concept’s suitability for contemporary personalisation.


The LRX Black & Silver is powered by a 2.0-litre turbodiesel hybrid, with potential CO2 emissions of 120 g/km and fuel economy of 60 mpg (4.7 l/100 km). The concept’s integrated Electric Rear Axle Drive (ERAD) is particularly significant in Land Rover terms as it would allow LRX to use electric drive alone at lower speeds while retaining full (even improved) 4x4 ability in tough conditions. Unlike the hybrid technology used by some 4x4 rivals, Land Rover’s unique solution retains mechanical drive to all four wheels.


Using lightweight material technologies, Land Rover has developed a series of bespoke features for the black and silver LRX that add to the vehicle’s individuality and flexibility. The removable carbon composite roof panel contrasts with the silver-coloured roof, and has integral anchor points for fixing snowboards and other sports equipment. The sleek black roof bars provide another option for roof-top loads, and a compact step above the rear bumper provides for easy roof-top access. More carbon composite is used for the protective underbody plates at front and rear, while new, lightweight alloy wheels with unique-design tyres signal purposefulness. And to protect the vehicle when the going gets tough - in either urban or off-road situations - there are smart, resilient mouldings on bumpers and sills.

Press release

Land Rover shows two different versions of its LRX concept in Geneva -desirable, premium and compact 4x4s which extend the definition of ‘breadth of capability’

Brand new, black and silver version of LRX designed to highlight the concept’s suitability for contemporary personalisation

Conceived as capable of having a range of powertrains, including a 2.0-litre turbodiesel hybrid, with potential CO2 emissions of 120 g/km and fuel economy of 60 mpg (4.7 l/100 km)

Demonstrates Land Rover’s commitment to sustainability – with new technologies, lightweight design and environmentally-responsible materials


A bold evolution of Land Rover design – but still unmistakably a Land Rover
Impeccable attention to detail and precision of execution underpin LRX’s premium credentials

A striking black and silver version of Land Rover’s acclaimed LRX cross-coupe concept makes its global debut at the 78e Salon International de l’Automobile, alongside the original white LRX revealed earlier to widespread acclaim (at NAIAS, Detroit, in January).

"With its metallic black paintwork, silver roof and precisely detailed exterior features, the second version of the LRX concept is designed to show how well the vehicle can deliver a contemporary example of personalisation," says Gerry McGovern, Land Rover’s design director.

"The LRX concept already has an abundance of character, but you can tune the appearance to reflect a customer’s own personality and lifestyle. Clever use of colour and subtle additional details enable the vehicle to be tailored to suit an individual’s style, without compromising the clean design of the LRX," he adds.
No production plans have been confirmed yet for the LRX concept, and both versions will now be used to gauge public, dealer and media response to Land Rover’s cross-coupe concept, as well as its interesting new opportunities for vehicle personalisation.

"We were hugely excited by the positive response that the original LRX concept generated when we showed it at the Detroit Show a few weeks ago," says Phil Popham, managing director of Land Rover. "But we’ve always seen scope for LRX to provide a whole showroom of different models, with a range of powertrains including hybrids and bio-fuel capable engines."

Using lightweight material technologies, Land Rover has developed a series of bespoke features for the black and silver LRX that add to the vehicle’s individuality and flexibility. The removable carbon composite roof panel contrasts with the silver-coloured roof, and has integral anchor points for fixing snowboards and other sports equipment. The sleek black roof bars provide another option for roof-top loads, and a compact step above the rear bumper provides for easy roof-top access. More carbon composite is used for the protective underbody plates at front and rear, while new, lightweight alloy wheels with unique-design tyres signal purposefulness. And to protect the vehicle when the going gets tough - in either urban or off-road situations - there are smart, resilient mouldings on bumpers and sills.

"The black and silver LRX shows a real world breadth of capability. Its all-terrain ability, extra protection and load-carrying versatility help emphasise that it’s an authentic Land Rover, while its compact dimensions, agile handling and efficient powertrain make it a practical proposition for everyday driving," says Phil Popham.


BOLD EVOLUTION
The LRX concept marks a bold evolution of Land Rover design, signalling the brand’s potential shift into new areas of the market, while remaining true to its core values. As the company celebrates its 60th anniversary during 2008, the three-door LRX, with its more compact size, lighter weight and sustainability-focused technologies, clearly addresses the needs of a changing world and offers the potential of 120 g/km CO2 emissions and fuel economy of 60 mpg (4.7 l/100km) on the European combined cycle.

“The LRX concept delivers the powerful message that we are as serious about sustainability as we are confident about the continuing relevance and desirability of our vehicles,” says Phil Popham, Land Rover’s managing director. “LRX is in every respect a Land Rover, but it’s a very different Land Rover.

“LRX has unmistakable Land Rover design and the breadth of capability that you’d expect from our vehicles. But it carries those essentials into a segment where the brand has never been before, and with a proposed level of efficiency that would make it one of the cleanest vehicles in its class. It is Land Rover’s way of affirming the brand’s responsible approach to future product development. At this stage, LRX is purely a concept, designed to help us develop our thinking as well as gauge customer reaction – but this feels like a hugely exciting direction to take.”


COMPACT AND PREMIUM
LRX is described as a cross-coupé and dramatically extends the scope of what Land Rover represents. Though 149 mm (5.9 in) shorter than the Freelander 2 / LR2 and 205 mm (8.1 in) lower, LRX is conceived as a premium car, designed to appeal to new customers in the luxury and executive sector – those who want many of the benefits of a 4x4 and the presence of a larger vehicle, but in a more compact package.

The first all-new Land Rover revealed since Gerry McGovern became the company’s design director, LRX is a natural extension of the Land Rover range, complementing the existing models and helping to define a new segment. Its many recognisable Land Rover design cues include bold new interpretations of the signature clamshell bonnet, the floating roof and the solid ‘wheel-at-each-corner’ stance.

“LRX is a design born out of passion for the brand, but it is different, relevant, engaging and exciting – because Land Rover has never built ordinary cars,” says Gerry McGovern. “LRX has a highly desirable identity and the design alludes strongly to its capability, while clearly underlining our forward-looking philosophy – it’s a Land Rover that would be comfortable on Bond Street or Fifth Avenue, but wouldn’t flinch at getting its wheels dirty.”

Its compact size is one of its greatest assets, which will appeal to anyone who wants the versatile ability of an agile 4x4 with the cachet of the Land Rover name. In addition, its lower weight and the reduced aerodynamic drag resulting from the smaller frontal area would help give significant gains in fuel efficiency and reduced CO2 emissions.


HIGHLY EFFICIENT POWERTRAIN
The white LRX is conceived as a highly fuel-efficient 2.0-litre, turbodiesel hybrid, capable of running on bio-diesel. In combination with other Land Rover technologies, this powertrain could reduce fuel consumption by as much as 30% compared with other 4x4s of comparable size, and reduce CO2 emissions to approximately 120 g/km.

LRX’s improved efficiencies are the result of advanced mechanical and electrical energy-saving elements, which are combined to achieve cumulative gains in many areas.

The concept’s integrated Electric Rear Axle Drive (ERAD) is particularly significant in Land Rover terms as it would allow LRX to use electric drive alone at lower speeds while retaining full (even improved) 4x4 ability in tough conditions. Unlike the hybrid technology used by some 4x4 rivals, Land Rover’s unique solution retains mechanical drive to all four wheels.

Off-road, the ERAD would provide additional torque only when it is needed, and with maximum electrical torque from standstill, this solution offers even better low-speed control and enhanced pull-away on difficult surfaces (such as packed snow or wet grass) or when towing.

On the road, the ERAD would allow low-speed traffic creep up to 20 mph (32 km/h) on electric power alone, with the Integrated Starter-Generator (ISG) function re-starting the engine automatically when needed. The electric drive would then continue to assist the mechanical drive until the engine is running in its most efficient range, benefiting both fuel consumption and CO2 emissions.

The ISG would also stop the engine automatically when the vehicle halts in traffic, so the engine does not idle needlessly, and restart it quickly and smoothly as required.

The electrical drive system uses power stored in a dedicated high-voltage, high-capacity, lithium-ion battery pack, independent of the normal 12-volt battery. This is charged by a regenerative braking energy system, also working through the ERAD.

LRX also incorporates Hill Descent Control and Land Rover’s acclaimed and user-friendly Terrain Response system, which optimises vehicle drivability and comfort, as well as maximising traction. On LRX, this has five modes, including the new and efficiency-focused ‘Eco’ mode. Principally for on-road use, this configures all the integrated elements of the car’s system for optimised fuel economy. The other four Terrain Response modes provided are sports (also new), general driving, sand and ‘grass/gravel/snow’ (a single programme for slippery surfaces).


EXTENDING ‘BREADTH OF CAPABILITY’
The positioning of LRX could be described as moving subtly from traditional SUV to crossover, with its more car-like appearance and dynamics that are sportier and on-road biased. But while its character is underlined by excellent agility, handling and performance, LRX also promises the widest breadth of capability in the class.

The design of LRX was developed entirely in-house by Gerry McGovern’s team, driven by a passion to create a car that truly represents Land Rover’s future thinking. It has a very dynamic profile, with a distinctive taper to the floating roofline and a muscular shoulder running the length of the car, accentuated by the rising beltline. The glazing wraps right around LRX, with no exposed pillars, creating a bold design graphic. The architectural structure of the upper body can be glimpsed through the windows and roof – echoing some of the best contemporary buildings.

Pushing the wheels out to the four corners helps give the car its purposeful stance, and its front-end design makes a powerful and instantly recognisable statement of Land Rover’s identity. The carefully sculpted corners dramatically reduce the car’s visual overhangs front and rear.

There are new interpretations of Land Rover’s traditional clamshell bonnet, distinctive headlamps and perforated two-bar grille. The car has jewel-like, tapering blade indicator clusters front and rear, and the wheelarches are wide but softly integrated, housing highly polished, 20-inch alloy wheels.

The fine detailing includes additional polished aluminium in the form of side-strips, side and bonnet vents, and the exterior door releases, which are concealed in the car’s shoulders. Graphic details such as these appear to be ‘punched out’ of the smooth body surfaces rather than overlaid on them. The ‘frosted’ white paint colour was especially developed for LRX and its visual depth helps to highlight the car’s form.


IMPECCABLE, PREMIUM INTERIOR
The interior of the LRX concept clearly demonstrates how a compact Land Rover can still be roomy, practical, versatile – and sophisticated. The impeccably executed cabin features a combination of soft leathers in rich tan and dark chocolate, with polished aluminium details, while the visible structures of the seats, instrument panel and roof architecture not only give a highly distinctive look but also help save weight.

The ‘fast’ sloping architecture of the centre console reflects LRX’s sporty dynamics, as does the distinctive binnacle over the instrument cluster. The electronic display uses ‘floating’ LCD graphics to create a three-dimensional look that can be personalised for different drivers, as well as interacting with LRX’s touch-screen display.

The instrument graphics present data in layers depending on their level of importance, to give maximum relevant information with minimum distraction. When appropriate, displayed information transfers between the main instrument cluster and the touch screen. Further adding to LRX’s involving personality, different Terrain Response modes are matched by changes in the cabin’s background ‘mood’ lighting colour – green in ‘Eco’, red in sports and blue in general driving and off-road modes.

CLEVER USE OF SPACE

Although LRX is compact, clever use of space makes it impressively roomy, and many neat design touches maximise its practicality. A second touch-screen area gives a fully interactive display and control for LRX’s iPhone docking facility.

On either side of the horizontally-split, power-operated tailgate, removable and power-adjustable speakers include an iPod docking station. There is also a coolbox, plus a bottle chiller that can be clipped to the lowered tailgate. The tailgate also has integral aluminium cupholders between two padded seating areas, for a new twist on the idea of a traditional Land Rover tailgate lunch.

Every interior design detail combines to maximise both actual space and the feeling of space. The clear roof is supported by a ‘spider’ frame running into the A-pillars, and the rear quarter pillars have glazed apertures for improved visibility and a lighter feel in the cabin.

LRX’s distinctive seats ‘float’ on individual plinths and have open frameworks to reinforce the impression of light, airy interior space – while also creating useful under-seat and under-floor stowage areas. The clever, articulated mechanism of the powered seat backs maximises interior flexibility and helps create a large, flat storage area when needed. With the rear seats folded forward, two mountain bikes can be fitted upright behind them, with front wheels removed and stored in dedicated slots in the floor. Alternatively, skis and surfboards can be accommodated in the generous load space, which has multiple tie-down options and a through-loading option.

“Flexible load-carrying capacity is fundamental to the concept of LRX,” says Gerry McGovern. “With this car, we’ve interpreted the idea of Land Rover ‘breadth of capability’ to be more about versatility and on-road dynamics than about ultimate off-roading. This meets the needs of the new customers that we believe would be attracted by this type of car; they will not only appreciate LRX’s flexibility, but will also recognise that it has been packaged with the highest levels of precision.”


SUSTAINABLE PRODUCT DESIGN
The exposed structures of the seats, roof and instrument panel are just one novel approach that Land Rover’s designers have taken to reduce vehicle weight. Another example is replacing the glass for the side windows and roof with polycarbonate from SABIC Innovative Plastics, which is around 40% lighter. The polycarbonate also blocks virtually all UV light (protecting interior materials from fading), while special nano-technology within the material reduces infra-red transmission, helping to keep the interior cool.

Even the choice of premium-quality trim materials reflects Land Rover’s deep thinking about sustainability, with vegetable-tanned leather (chromium-free, so better for recycling), extensive use of aluminium (both lightweight and readily recyclable) and carpeting made of felt from sustainable sources. And the luxurious, vanilla-coloured ‘fine suede’ on the door inserts and headliner is a 100% recycled material made from used plastic bottles and fibres.

“We are determined to make sustainability a key element in our future product design and the way we do business, while still creating vehicles that have a strong emotional appeal as well as fulfilling people’s practical needs,” says Phil Popham. “No single technology delivers all the answers to whole-life sustainability, but the LRX concept brings together some of the ideas for the future that interest us, integrating them into a car that we believe represents an exciting way forward for Land Rover.”

TECHNICAL SPECIFICATIONS

• Length: 4351 mm / 171.3 in
• Width (excluding mirrors): 1895 mm / 74.6 in
• Width (including mirrors): 2083 mm / 82.0 in
• Height: 1535 mm / 60.4 in
• Wheelbase: 2660 mm / 104.7 in
• Engine (proposed): 2.0-litre turbodiesel
• Fuel economy (potential): 60 mpg, 4.7 l/100 km (on European combined drive cycle)
• CO2 emissions (potential): 120 g/km (on European combined drive cycle)

2008 Audi Q7 V12 TDI quattro

Audi previewed today the Q7 V12 TDI quattro, a new version of the Q7 SUV that will debut in Geneva. The diesel version of the Q7 will go on sale in the second half of 2008.


The Q7 V12 TDI quattro is powered by the world’s first V12 diesel engine that generates 500 hp of power and 1,000 Nm (757.56 lb-ft) of torque from six liters of displacement. It makes the 0 to 60 mph sprint in just 5.5 seconds while the top speed is electronically capped at 250 km/h (but on the speedometer, the range extends up to 310 km/h).

The Audi Q7 V12 TDI quattro’s powerful engine torque flows through a rapidly and gently shifting six-speed tiptronic that was specially designed for the six-liter diesel engine’s immense torque. The driver can shift the gears of the automatic transmission either with the selector lever or manually with the standard chromed shift paddles on the three-spoke steering wheel.


The quattro drive distributes the power to the front and back wheels in a 40:60 ratio – giving the vehicle a sporty, rear-focused driving style that guarantees maximum agility and driving enjoyment. When needed, the inter-axle differential transfers most of the power to the axle with better traction. Great care has also been devoted to reinforcing all key components in the quattro driveline.



Press release

Audi is taking TDI technology to a whole new level with the Audi Q7 V12 TDI quattro, the most powerful diesel-powered passenger vehicle in its class. The V12 engine under the hood generates 368 kW (500 hp) of power and 1,000 Nm (757.56 lb-ft) of torque from six liters of displacement, enabling the big SUV to perform like a sportscar. The new Audi Q7 V12 TDI quattro represents a combination of superior power and efficient fuel consumption, an Audi hallmark. With its sporty chassis, modified body and exclusive equipment, the Audi Q7 V12 TDI quattro is the consummate high-performance SUV. quattro GmbH, a wholly owned Audi subsidiary, is responsible for production and development of the vehicle. Series production of the Audi Q7 V12 TDI will begin this year.

Audi, the inventor of TDI technology, is penning a new chapter in the history of diesel engines with the Audi Q7 V12 TDI quattro. The world’s first V12 diesel engine in a series-production vehicle moves this big, high-performance SUV with supreme confidence and composure. On demand, the six-liter engine catapults the Audi Q7 from zero to 100 km/h (62.14 mph) in 5.5 seconds like a top-class sportscar. Speed is electronically capped at 250 km/h (155.34 mph).

The 12-cylinder diesel engine is no less impressive when it comes to fuel consumption. On average, it requires just 11.9 liters of fuel per 100 km (19.77 mpg), a surprisingly good figure in light of the strength of the engine. The six-liter TDI uses significantly less fuel than any competing gasoline engine in the high-performance SUV sector; thanks to efficient combustion and the complex exhaust emission control system, the Audi Q7 V12 TDI quattro already complies with future emissions standards.


Totally refined, high-tech engine
The V12 TDI captivates its drivers with sheer inexhaustible power and highly cultivated operation – the subtle engine sound takes on a voluminous, strong note when the throttle is open. The six-liter unit is a member of the modern family of Audi V engines, all of which have center-to-center spacing of 90 millimeters (3.54 inches) between cylinders. Instead of the usual 90 degrees, however, its cylinder angle measures 60 degrees. This method of construction is ideal for the V12 as it prohibits any undesirable free inertial forces and moments of inertia.

Another factor contributing to the vehicle’s smooth running characteristics is the high rigidity of the crankcase. Made of cast vermicular graphite, it is approximately 15 percent lighter than conventional gray iron. The six-liter unit is extremely compact at just 684 millimeters (26.93 inches) in length. The crankshaft is held in place by a rigid main bearing bracket. The V12 TDI’s engine capacity of 5,934 cc is derived from a bore measurement of 83.0 millimeters (3.27 inches) and a stroke of 91.4 millimeters (3.60 inches), just as in the 3.0 TDI.

The aluminum cylinder heads consist of three elements: the lower section where the intake and escape channels are integrated, the upper section which guides the flow of oil and a reinforced ladder frame containing the two camshafts driven by two simplex chains on the back of the engine. The valves are actuated by low-friction roller cam followers. Map-controlled flaps in the intake channels cause the induced air to swirl. This improves combustion, thus reducing emissions and enhancing performance.


High pressure: 2,000 bar in the common rail system
The common rail injection system, with high-pressure pumps driven by chains, can create pressure of up to 2,000 bar. The high pressure level permits intensive mixture formation of the fuel in the combustion chamber, thereby facilitating especially smooth, acoustically satisfying combustion. Shifting very rapidly and precisely, the eight-hole injectors working on the piezo principle can deliver up to five injections per combustion cycle.

Two turbochargers are positioned on the exterior of the V engine, each supplied with a cylinder bank. Thanks to their adjustable guide vane geometry, they respond quickly even at low engine speeds and reach high levels of efficiency, applying a relative maximum boost pressure of 1.6 bar. Two large charged air coolers reduce the temperature of the compressed air, paving the way for the high output of 500 hp.


Outstanding performance paired with exceptional efficiency
The six-liter TDI unit is further impressive proof of the technological leadership embodied in Audi’s “Vorsprung durch Technik” slogan. Back in 1989, the brand with the four rings put the TDI principle into series production and has been continually advancing it ever since at the forefront of the field. The most powerful diesel in its class generates an extremely high specific torque of 169 Nm (124.64 lb-ft) per liter of capacity; 1,000 Nm (757.56 lb-ft) is available at a range of 1,750 to 3,250 rpm. Specific power output is 62.0 kW (84.3 hp) – equivalent to that of a sportscar.

The new V12 TDI in the Audi Q7 is closely related to the engine that twice powered the Audi R10 TDI racing car to overall victory in the Le Mans 24 Hours – a 5.5-liter V12 that delivers approximately 480 kW (over 650 hp).

The Audi Q7 V12 TDI quattro’s powerful engine torque flows through a rapidly and gently shifting six-speed tiptronic that was specially designed for the six-liter diesel engine’s immense torque. The driver can shift the gears of the automatic transmission either with the selector lever or manually with the standard chromed shift paddles on the three-spoke steering wheel.

The quattro drive distributes the power to the front and back wheels in a 40:60 ratio – giving the vehicle a sporty, rear-focused driving style that guarantees maximum agility and driving enjoyment. When needed, the inter-axle differential transfers most of the power to the axle with better traction. Great care has also been devoted to reinforcing all key components in the quattro driveline.


High tech from Audi: The aluminum chassis
The chassis of the Audi Q7 V12 TDI quattro is a marvel of high-tech construction. Elaborate double wishbones guide the front and rear wheels; the axle components are made primarily of aluminum. Thanks to the extreme precision and directness of the servotronic steering, the driver remains in close contact with the road. This is where the handling characteristics, driving safety and comfort of the high-performance SUV set new standards. With maximum ground clearance of 205 millimeters (8.07 inches), the Audi Q7 V12 TDI quattro also proves itself easily capable of handling the demands of rough terrain.

The adaptive air suspension works with sporty new tuning. In combination with electronically controlled shock absorbers incorporating dynamic roll stabilization, the air suspension can be adjusted in three zones ranging from extremely comfortable to highly dynamic. The driver can also adjust ground clearance in five stages via this system and lower the tail end by 71 millimeters (2.80 inches) for comfortable loading.


Standard carbon-fiber ceramic brakes
The ultimate high-performance SUV from Audi takes to the road on sporty 10-spoke wheels of 20 inches in diameter. Alternatively, the wheels are also available in a 20-spoke design or as 21-inch variants in three different designs. Behind the large wheels is a powerful 20-inch brake system. Made of ceramic reinforced with carbon fiber, the internally ventilated disks are notable for their low weight, robust performance and minimum wear. The front disks are gripped by eight-piston brake calipers, while the rear brakes function with four pistons each. The calipers are titanium gray and the front ones bear the “Audi ceramic” logo.

The visual styling of the Audi Q7 V12 TDI quattro gives it an unmistakable look. Daytime running lights consisting of twelve white LEDs per headlight announce the vehicle’s presence even at a distance. They are located on the upper edge of the air intake slots, replacing the turn signals that were moved to the bi-xenon headlights. Further honing the vehicle’s profile is a chromed grid in the single-frame radiator grill and a shiny underbody protector made of stainless steel. The newly designed bumper groups the side air intake slots into large units.

When viewed from the side, both the 20-inch wheels and the matt aluminum caps on the exterior mirrors catch the eye. The wheel arches have been widened a total of 26 millimeters (1.02 inches) at the front and 30 millimeters (1.18 inches) at the rear; the lower edges of the doors flaunt striking new moldings. The windows are framed by matt aluminum cover strips, the roof rails sport the same look. The taillights are set in a dark-colored background, while the newly designed bumper incorporates two large, oval exhaust tailpipes. At the rear, the underbody protector is also made from stainless steel. A metallic or pearl effect finish comes standard.


Sophisticated: Highlights on board the Audi Q7 V12 TDI
In the interior of the most powerful Audi Q7, passengers will find shiny door sill trim with aluminum inserts and velours carpet. Carbon covers and the aluminum-look selector lever give the center tunnel a high-tech ambience, exclusive wood trim is available as an option. The buttons of the MMI operating system, which has proven a superior concept in numerous independent tests, gleam in silver, the air vents in aluminum, the pedals and footrest in stainless steel. On the speedometer, the range extends up to 310 km/h (192.63 mph).

Verano leather covers the electrically adjustable sport seats, the deluxe center armrest and the armrests in the doors are upholstered with leather as well. The front and rear seats can be heated; a special lighting package softly illuminates the interior.

Also included in the luxurious standard specification are the leather package, leather multi-function sports steering wheel, black roof lining, folding exterior mirrors, DVD navigation system, Bose Surround Sound system with CD changer, Bluetooth mobile phone preparation, alarm system and tire pressure monitoring system. The tailgate opens and closes electronically. Partially overlapping the D-pillars, it gives the vehicle a brawny rear body.

There are four optional high-tech assistance systems for the Audi Q7 V12 TDI quattro: The adaptive cruise control system, Audi lane assist and Audi side assist aid the driver in maintaining the proper distance to the vehicle ahead, staying in lane and changing lane, while Audi parking system advanced incorporates a camera for a clear view behind the vehicle.

The optional Audi music interface offers a convenient iPod interface. Available on request, the B&O Advanced Sound System creates an unparalleled acoustic experience. An even more comfortable interior can be achieved with the advanced leather package that includes, among other things, exclusive leather covering of the instrument panel and center console.

The large glass roof open sky system is available to crown the spacious interior – optionally with four, five, six or seven variable seats – as is a rail system for the cargo area of up to 2,035 liters in size.

Presales of the Audi Q7 V12 TDI will begin in the second half of 2008. The most powerful diesel vehicle in its class is the exclusive top-of-the-line model in the Q7 range.

Audi R8 by MTM

MTM is about to modify the Audi’s sportscar R8, and here are the first images of the prototype. The test car is equipped with forged mtm bimoto rims which – due to their style of construction - are very light but yet rigid. The rim sizes for front and rear axle are specially customized for the R8 and positively influence the tendency to over-/understeer. Sport tyres – so-called semislicks – with MOT approval are optionally available . The rims will be in stock in June.

A special tidbit will be the exhaust-gas system made of stainless steel which will of course be delivered with a flue gas damper control. MTM will also improve the already impressive serial sound. Thanks to an elaborated damper piloting MTM increases the volume without leaving the permitted range. The result is a TÜV certificate delivered with every exhaust-gas system. In stock presumably in May.

Spacers for series wheels, brake pads as well as sport brake pads with 380x34mm for the front axle are already available!

Ford Recall News

2005 through 2008 Mustangs are the latest Fords to be recalled, and the National Highway Traffic Safety Administration is also admonishing owners of other Fords to return their cars to dealers for a redo of an earlier recall.

The Mustangs are being recalled to reprogram the airbag control module. According to the NHTSA, small stature women who have the seat fully forward and are, additionally, so foolish that they’re not wearing a seatbelt have “increased potential for a neck injury.” A total of 434,593 Mustangs are being recalled.

Meantime, NHTSA is after 4.6 million Ford, Mercury, and Lincoln owners who have, so far, ignored an earlier recall to fix a fire hazard resulting from a potentially faulty cruise control switch. 5 million Ford owners have responded to the campaign, barely above 50%. The vehicles involved are certain 1992 through 2004 models.

Although the size of the recall means that some dealers may not presently have the required parts in stock, dealers will disconnect the potentially faulty switch – usually on the spot, if the owner simply drives the car into the service department – until the part can be replaced.

The complete list

Trucks: 1997-2002 Expedition 1998-2002 Navigator 2002-2003 Blackwood 1993-1996 Bronco 2000-2003 Excursion (built prior to 11/4/02) 1992-2003 Econoline E-150/250/350 1996-2003 Econoline E450 2002-2003 Econoline E550 1998-2002 Ranger 1998-2001 Explorer/Mountaineer 2001-2002 Explorer Sport (2 door) & Sport Trac 2003-2004 F-150 Lightning 1993-2003 F-Series (Under 8500 lb. GVW) 1993-2003 F-Series (over 8500 lb. GVW) – all plants except Cuautitlan 1994-2003 F-Series (over 8500 lb. GVW) – Cuautitlan built only prior to 1/7/03 1995-2002 F-53 Motorhome

Cars: 1992-1998 Town Car 1992-1998 Crown Victoria 1992-1998 Grand Marquis 1993-1998 Mark VIII 1993-1995 Taurus SHO (automatic transmission) 1994 Capri *equipped with speed control. Diesel engine equipped vehicles are excluded from recall